Scavenger工作室是為一位藝術家兼社會活動家設計的面積為693平方英尺的工作室。它位於華盛頓州郊區的森林裡，設計師用了儘可能多的可循環材料建造而成。設計師從即將被拆除的房屋中搶救出了許多材料，並將它們製成了櫥櫃、樓梯踏板和花盆。廚房和客廳位於首層的雙層通高空間，睡覺的閣樓位於上層。將床邊的一個牆板拉開後房間向周圍精緻打開。該工作室坐落在一個簡單的由六個基座組成的地基上，這樣有助於減少建造成本。立面上覆蓋著業主用日本一種名為“燒杉板”的技術製成的T1-11膠合板。該技術可以保護木材並製出一種更深的色調，有助於將房屋和周圍的森林融為一體。外部還使用了名為Hardie的塗漆板。承包方拆除的房子內的廚房櫥櫃被重複利用。地板是石質的，天花板使用了膠合板，牆則由紙面石膏板製成
。聚碳酸酯板被用來做了頂窗。Scavenger Studio is a 693-square-foot studio designed for an artist/activist. The little structure is situated in the woods in rural Washington State, and was built using as much free-cycled material as possible. Scavenged materials—ranging from cabinetry to stair treads to plants—were salvaged from homes slated to be demolished. The kitchen and living area occupies the ground level of the double-height interior, while a sleeping loft is above. A panel next to the bed drops down, opening the room to its surroundings. The studio sits light on the land, resting on a simple, six-footed foundation, which also helped to limit construction costs. The facade is clad in T1-11 plywood, which was charred by the owner using a Japanese technique called shou sugi ban which preserves the wood and creates a darker tonal value that helps to blend the home into the surrounding forest. The exterior also includes a painted HardiePanel. Kitchen cabinets were saved from a house the contractor was demolishing. The floor is masonite, the ceilings are plywood, and the walls are drywall. Polycarbonate panels were used for clerestory windows.
▼項目一覽，project overview
▼位於上層的閣樓臥室，將一個嵌板打開後室內與室外空間連接起來；the sleeping loft locates at the upper floor and opens up to its surroundings when dropping down the panel
▼工作室入口，the entrance of the studio
▼室內的雙層高空間，the double-height space
▼二層的臥室，大面的玻璃使得室內外空間彷彿連接在一起；the sleeping loft with large windows allows the interior space extend to the exterior
▼一二層平面，the first and second floor plan
▼剖面，the section
項目團隊：
由Eerkes Architects的Les Eerkes設計（該項目由Eerkes設計，而Olson Kundig的設計負責人，Olson Kundig是記錄設計師）。
Yousman Okano（職員建築師）
Schuchart / Dow（承包商）
製造商/材料：
GAF（屋頂）
James Hardie（HardiePanel）
Viking （家電）
Lexan（天窗）
攝影：
Benjamin Benschneider
Design by Les Eerkes of Eerkes Architects (the project was designed by Eerkes while a Design Principal at Olson Kundig. Olson Kundig is Architect of Record).
Yousman Okano (staff architect)
Schuchart/Dow (contractor)
Manufacturers/Materials:
GAF (roofing)
James Hardie (HardiePanel)
Viking (appliances)
Lexan (clerestory windows)
Photography:
Benjamin Benschneider
閱讀更多 Sunset設計 的文章
