1,問題描述
S5700-P-LI交換機通過業務口作為堆疊端口,採用光模塊和光纖作為堆疊線纜的方式組建堆疊,對設備進行堆疊時,出現如下錯誤提示:
[Server-stack1-stack-port0/1]por interface g 0/0/27 enable
Warning: Enabling stack function may cause configuration loss on the interface, continue?[Y/N]:y
Error: Configuration failed. Please check optical module(s).
[Server-stack1-stack-port0/1]por interface g 0/0/28 enable
Warning: Enabling stack function may cause configuration loss on the interface, continue?[Y/N]:
Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y
Error: Configuration failed. Please check optical module(s).
2,解決方案
通過查閱產品文檔可知,S5700-P-LI支持業務口堆疊,如下圖所示:
![S交換機配置業務口為堆疊端口失敗原因分析,王海軍老師告訴你](http://p2.ttnews.xyz/loading.gif)
而通過業務口連接方式組建堆疊步驟如下:
![S交換機配置業務口為堆疊端口失敗原因分析,王海軍老師告訴你](http://p2.ttnews.xyz/loading.gif)
可知操作沒有問題,再返回分析錯誤提示:Error: Configuration failed. Please check optical module(s).經分析可知,錯誤原因是光口的端口模式出現問題,經分析得知,端口上雖然沒有連接堆疊線纜,但是由於配置堆疊口,改變了端口的模式,而端口上此時卻插著光模塊,因此產生衝突。當把光模塊拔出時,再執行添加堆疊端口命令,顯示成功。
因此,在通過業務口作為堆疊端口,採用光模塊和光纖作為堆疊線纜的方式組建堆疊時,在配置軟件時,仍然不能插入光模塊,一直等到配置軟件結束之後,設備下電之後,才能插入光模塊並連接光纖作為堆疊線纜,在以後的堆疊操作中,請注意這個問題。
閱讀更多 王海軍老師 的文章