美国原装进口EPX10000数字频率合成雷达远程探测仪，它是目前操作最简单、功能最全面的高精度设备之一。此机器可用于黄金、沙金、银、青铜、铁盐、锡、宝石等金属物品的查找，亲自测器实际探测深度可达20米左右，范围可达500-800米。
The United States imported EPX10000 radar remote detector digital frequency synthesis, it is currently operating the simplest and the most comprehensive functions of one of the high precision equipment. This machine can be used for gold, alluvial gold, silver, bronze, iron, tin, gem metal objects such as search, personally sensor actual detection depth of 20 meters, range of up to 500-500 m.
1、将传感器连接到扫描仪的testing（+）testing(-)插孔上，并将传感器的探头插入泥土
2、将信号发射的发射天线装置在对应的接口上.
3、用电源钥匙旋转“On/Off旋钮，打开电源。此时，在液晶显示区域、电源指示灯、横向微调、纵向微调指示灯点亮。
4、此时，EPX10000正在扫描所选的任何元素。在开始探测程序之前，请先运行3-5分钟，这将在后面进行简单解释。
5、操作结束后，记住关闭EPX10000的电源。为了方便使用，该仪器的电池需要使用连接在仪器电源线上的小充电器充电。
1, connect the sensor to the scanner testing (+) testing (-) hub, and insert the sensor probe into the soil
2 the launch of the transmitting antenna, the signal device in the corresponding interface.
3, with the power key spinning "On/Off button, open the power supply. At this point, in the area of liquid crystal display,, horizontal fine-tuning, vertical fine-tuning of the indicator light is lit.
4, at this point, the EPX10000 is scanning the selected any element. Before starting the detection procedure, please run for 3-5 minutes, this will make a simple explanation in the back.
5, after the operation, remember turning off the power of the EPX10000. For the convenience of use, the instrument need to use the batteries connected to the instrument power cord on the small charger.
技术参数：
1、探测深度范围:5-50m
2、探测距离范围:100-1000m
3、充电电池:连续工作8小时
4、电压:12VDC
5、温度范围:450C一850C
6、工作湿度:0~95%(非冷凝)
7、16位处理器.40MIPS速度—160MHz
8、32位DDS合成芯片，输出波形
9、数字频率合成X20PLL自动频率稳定器，0.1Hz
10、彩色液晶显示屏，分辨率为480x320像素
11、净重:6.6KG毛重:10.5 KG
12、产品尺寸:47X37X13.5cm
Technical parameters:
1, the detection depth range: 5-50 m
2, detection distance range: 100-1000 m
3, rechargeable battery, continuous work 8 hours
4, voltage: 12 VDC
5, temperature range: 450 c 850 c
6, work humidity: 0 ~ 95% (condensate)
7, a 16-bit processor. 40-160 MHZ MIPS speed
8, 32-bit DDS synthesis chip, the output waveform
9, digital frequency synthesis X20PLL automatic frequency stabilizer, 0.1 Hz
10, color LCD display screen and a resolution of 480 x320 pixels
11, net weight: 6.6 KG gross weight: 10.5 KG
12, product size: 47 x37x13. 5 cm
控制面板介绍：
1、 雷达LCD扫描显示
2、 信号发射
3、 金属种类选择
4、 深度调节
5、 范围调节
The control panel is introduced:
1, the radar scan LCD display
2, signal emission
3, metal type selection
4, the depth of the adjustment
5, the scope to adjust
配件介绍：
接收天线棒——天线棒旨在向操作人员指出他/她已经步入功率传感器和目标之间的传输线。正常情况下，手持天线棒要稳定和平衡，齐腰高度，以及稍微位于操作人员前方。手持天线棒时，天线棒应指向前方，相互平行，且相隔8-18英寸距离。每一个人需要找到适合自己的最佳距离。这需要试验和出错才能找到。请记住，在操作该装置方面，沉着放松的人会比紧张僵硬的人做得好！当你进入射频能量线，测到东西的时候.天线棒将自然交叉.
Accessories is introduced:
Receiving antenna rod - antenna stick to operator said he/she is in power transmission between the sensor and the target. Under normal circumstances, handheld antenna rod stability and balance, waist height, and located in front the operator slightly. Handheld antenna rod, antenna rod should be pointing to the front, parallel to each other, and 8 to 18 inches apart. Everyone needs to find suits own best distance. This requires trial and error to find. Remember, in terms of operating the device, calm and relaxed people than tension stiffness well done! When you enter the rf energy line, to things from time to time. The antenna rod will naturally cross.
且雷达扫描指针会停顿在一个位置.天线交叉和雷达扫描停顿下来的时候，你看到了胜利的曙光就到来了.
接收器信号增强器：用于增强信号。
接收器——接收器在面板的上面是旋钮开关，它们分别是耳机和天线棒插孔。不使用时，将天线棒从接收器上拔掉！若天线棒插在接收器里保存，则将导致电池漏电。
And radar scanning pointer will pause in one place. Cross and radar antenna scan pauses when you see the victory of the dawn is coming.
The receiver signal enhancer: used to enhance the signal.
Receiver, a receiver on the top of the panel is a knob switch, headphones and antenna, respectively is jack. When not in use, unplug antenna stick from a receiver. If the antenna rod inserted in the receiver to save, will cause the battery leakage.
閱讀更多 功夫小丸子 的文章
